Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Pompano Beach Homeowners
When a spring lets go, the door gets heavy fast, and it usually stops halfway. That’s the call we get most: a door that won’t lift, won’t close, or bangs once and then hangs there. Our technicians have up to 8 years of experience, and garage door spring repair is one of our most requested services in Pompano Beach, so the diagnosis is quick and the repair is done right the first time. We work on the brand you already have, whether it’s Raynor or LiftMaster. In most cases, we can get to you the same day. Call (855) 658-4102, and we’ll set up a free estimate.
What Our Garage Door Spring Repair Service Includes
Springs are the hardest-working part of a garage door system. They’re also the most dangerous part to touch. Every spring job we run starts with a full inspection and a written price before anyone touches a tool, so you know exactly what’s happening and what it costs. Here’s what each part of the job covers.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on the shaft above the door. When the door opens and closes, that spring winds and unwinds to counterbalance the door’s weight. It’s the part that fails most often. We replace torsion springs on doors of every common size, and we match the wire gauge and coil count to your door’s actual weight rather than guessing, because a mismatched spring wears out early and can overstress the opener. If one torsion spring on your door has broken, expect to replace the pair as a set, since a matched pair is designed to work together.
Extension Spring Replacement
Extension springs run along the tracks above each side of the door and stretch as the door moves down. They’re common on older doors, and they fail by snapping, which sends the spring toward whatever’s beside the track. That’s why the safety cables running through each spring matter as much as the spring itself. We replace extension springs in matched pairs and check the cables, the mounting points, and the door’s balance at the same time. If your door uses extension springs and one has snapped, it’s time to replace both.
Broken Spring Repair
A broken spring usually gives you very little warning. The door feels fine on Monday and won’t lift on Wednesday. Sometimes you hear a loud crack from the garage even when the door’s been sitting closed. When you call us, we’ll ask what the door is doing and whether the opener is still running. Then we confirm the break on site. In most cases, broken spring repair means replacement rather than repair; we don’t patch a snapped spring, because a second break is a real risk.
Spring Adjustment
Adjustment covers a door that opens and closes but feels wrong: it slams down, drifts, or the opener strains at the top of the travel. This usually means the spring tension is off. We measure and reset the tension against the door’s balance so the door stays put at any point in its travel. This is one of the jobs that requires the right winding equipment and a solid understanding of the door’s geometry. We don’t recommend homeowners adjust spring tension themselves.
Safety Cable Installation
Safety cables run through the center of extension springs and hold the spring in place if it breaks. Older doors often don’t have them, or have cables that are loose, frayed, or the wrong gauge. We install properly rated cables and secure them at both ends. This is a small job with real consequences if it’s skipped, and it’s worth checking when any spring work is happening.
Spring Inspection
Our spring inspection is a full check of the torsion or extension springs, the cables, the drums, the center bearing plate, and the door’s balance. We look at wire condition, coil separation, how the springs sit on the shaft, and how the door tracks through its full cycle. You get a clear picture of what’s fine and what needs attention. Nothing gets replaced without your approval and a written estimate first.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the equipment that’s already on your garage, not a preferred brand list. That includes Raynor doors with their specific spring and bracket configurations, and LiftMaster opener systems that need to be checked against spring balance after a spring change. Each brand builds its doors and hardware a little differently, and a technician who knows the brand knows where it wears out.
We also handle Chamberlain and Genie garage door and opener systems, along with Clopay, Amarr, Wayne Dalton, and Craftsman. When we replace springs, we set the door’s balance so the opener isn’t working harder than it should; that matters on Chamberlain and LiftMaster openers that have travel limits set into the motor. Whether you have Raynor, LiftMaster, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
Springs usually fail in one of a few recognizable ways. If you see any of these, stop using the door and call us. Running the opener with a broken spring can bend tracks or burn out the motor.
- A loud bang from the garage. This is the sound of a torsion spring snapping. The door may still be partially open or closed after it happens. It won’t open normally again until the spring is replaced, and it shouldn’t be forced.
- The door only opens a foot or two, then stops. This is a classic broken-spring symptom. The opener is trying to lift a door that no longer has a counterbalance, so it hits its limit and reverses. Don’t keep pressing the remote; each attempt adds strain to the opener.
- A visible gap in a spring above the door. Torsion springs break with a clean separation that’s easy to spot when you look up at the shaft. If you can see a gap in the coil, the spring is gone.
- The door is suddenly extremely heavy to lift. If you have to put your shoulder into it, the spring isn’t doing its job. This is often a sign of a failing spring or a tension problem.
- The door slams down or drifts upward. A door that won’t stay at the halfway point is out of balance. Spring tension is usually the cause. This one wears out the opener fast if it’s left alone.
Our Garage Door Spring Repair Process – Step by Step
- 1
We take the details over the phone. We ask what the door is doing, whether the opener still runs, and what kind of door it is. That lets us bring the right springs and tools on the first trip. If the door is stuck open, we’ll walk you through securing the area before we arrive.
- 2
We inspect the full door system before quoting. On site, we check the springs, cables, drums, center bearing, rollers, hinges, and the opener’s condition. Springs fail for a reason, and we want to find it. You get a written estimate with a clear price before any work starts.
- 3
We replace the spring or springs. The old spring comes out, the door’s weight is confirmed, and we install the correct wire gauge and coil count for your door. Torsion springs get wound with winding bars and locked down properly. Extension springs get replaced in pairs with safety cables checked or installed.
- 4
We rebalance the door and test it. New springs change how the door carries weight, so we balance the door to the new tension and test it through its full travel. We check that the door stays where you leave it, halfway or fully open. Then we run the opener through its cycle to make sure its travel limits still match.
- 5
We show you the finished job and the old parts. You see what came off and what went on. If we noticed anything else worth keeping an eye on, we’ll tell you plainly, without pushing. You can decide about that later; the repair you called about is done and tested.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Pompano Beach?
Garage door spring repair in Pompano Beach typically runs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that. The exact price depends on the spring type, the door’s size and weight, and whether cables or other hardware need attention at the same time. Here’s how the line items usually break down:
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair | $120 – $320 |
| Garage door repair (general) | $150 – $600 |
What moves the number: torsion versus extension springs, the wire gauge, and whether it’s one spring or a pair. Cable or drum damage found during the inspection adds to the job, but we won’t proceed with anything extra without telling you and getting your approval first.
To avoid overpaying, don’t skip the inspection. A cheap spring swap that ignores a worn cable or a rusted drum just means the next repair comes sooner. The Pompano Beach Garage Door Repair Co estimate is free, and it’s written down. The price is quoted and agreed before any work starts, and the written estimate sets the final price.
Garage Door Spring Repair Near Pompano Beach – Our Service Area
We cover Pompano Beach and the surrounding communities, including Lighthouse Point, Lauderdale-by-the-Sea, Coconut Creek, Hillsboro Beach, Oakland Park, Margate, Deerfield Beach, Wilton Manors, North Lauderdale, and Fort Lauderdale. We also handle garage door spring repair for Lighthouse Point homeowners and garage door spring repair in Lauderdale-by-the-Sea. Response windows depend on the day and location. Call (855) 658-4102 to check the next opening; we answer 24/7, with fast dispatch from 7am to 7pm.
Serving Pompano Beach, FL – Our Local Coverage Area
We serve Pompano Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Pompano Beach
Garage door spring repair is the replacement, adjustment, or inspection of the springs that counterbalance your door’s weight. Torsion springs sit on a shaft above the door; extension springs run along the tracks. In most cases the job means replacing a broken or worn spring rather than repairing it. We confirm the cause on site and give you a written price before starting.
Most spring replacements take about one to two hours for a single door, depending on the spring type and whether cables or hardware need attention. A torsion spring pair is usually a bit longer than a single extension spring swap. We’ll tell you what to expect when we book the appointment. Call (855) 658-4102 for an exact quote – estimates are free.
Spring repair in Pompano Beach typically runs $180 – $340 for one spring. A matched pair, which is usually replaced together, costs about twice that. Cable repair, if needed, runs $130 – $250, and the written estimate sets the final price before work begins. Call (855) 658-4102 for an exact quote – estimates are free.
Yes, we service Raynor doors and LiftMaster equipment, along with Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, and Craftsman. Our technicians work on the brand you already have, and they know the spring and bracket details that are specific to it. We don’t push replacements when a repair will do. Call (855) 658-4102 to tell us what door you have.
Often yes. Garage door spring repair is a same-day service in most cases, and we book emergency calls ahead of routine work. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 658-4102 and we’ll check the schedule.
We stand behind the work with a satisfaction guarantee, so if something’s off with the repair, we come back and make it right. Warranty terms for specific springs and parts are spelled out in your written estimate before work begins. Ask us about coverage on your specific job. Call (855) 658-4102 for details.
Clear the garage floor under the door and along both tracks, and if the door is stuck open, keep the area below it clear until we arrive. Don’t remove the springs or loosen any hardware yourself; springs are under high tension and can cause serious injury. Leave the opener disconnected from the door if the door is stuck open. Call (855) 658-4102 to schedule.
Schedule Your Garage Door Spring Repair Service in Pompano Beach Today
A broken spring means a door that won’t open, and most people find out the hard way when they’re already late. Our technicians have up to 8 years of experience with garage door springs on every major brand, and we can usually get there the same day. Call (855) 658-4102 to book your free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written price before any work starts. Call now and we’ll get your door moving again.
Written by the team at Pompano Beach Garage Door Repair Co.