Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Franklin Park?
Garage door work in Franklin Park typically runs $150 to $600 for most repairs, and a full new door installation runs $700 to $2,200. The most common call, a broken spring, is usually $180 to $340 for one spring, and a matched pair is usually replaced together for about twice that. Every price here is an estimate; the written quote you get on site sets the final number.
Franklin Park sits in the Broward County sprawl between Fort Lauderdale and the Miami-Dade line, where most homes were built with attached garages and the door is the way the family actually comes in. That means a door that won’t open stops the whole household, not just the car. We handle the repair, the opener, the springs, or a new door, and we work on the brand already in your garage rather than steering you toward a replacement you don’t need. Call (855) 658-4102 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical garage door repair in Franklin Park: $150 to $600.
- One spring: $180 to $340. A matched pair is about double.
- New door installation: $700 to $2,200 depending on size and material.
- The estimate is free, and the written quote is the price.
- We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment.
Garage Door Cost Breakdown (2026)
Here’s what each kind of job typically costs in the Franklin Park market. These are estimated ranges for standard residential doors, and the written estimate you receive is what you’ll pay.
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
A few notes on reading that table. The spring number is for one spring. Doors almost always carry a matched pair, they usually wear out close together, and replacing both at once is standard practice, so a pair costs about twice the single-spring range. Opener installation ranges wider than opener repair because it covers the whole unit and the drive system, not just a gear or a board. New door installation is the biggest swing on the list because it depends on the size of the opening, the material (steel, aluminum, wood-look), and whether the old door and track come out cleanly.
What pushes a job toward the top of a range: a door that’s off-track and needs the whole assembly reset, rusted or bent panels on a door near the end of its life, or an opener that needs a full replacement rather than a repair. What keeps a job at the bottom: a single worn roller, a misaligned track, a remote that needs reprogramming, or a limit switch adjustment. We diagnose first and tell you which one you’re looking at before any work starts.
For the full range of what we fix, see our Pompano Beach Garage Door Repair Co page.
What Affects Garage Door Pricing in Franklin Park
Franklin Park’s housing stock and climate shape what a garage door job costs here in ways that don’t apply everywhere. A few of the big ones:
- Hurricane-rated door requirements. Broward County sits in the high-velocity hurricane zone, and that changes what’s available and what it costs. A code-compliant door with the right wind rating costs more than a standard door, and the installation has to meet the county’s product-approval rules. Ask your city’s building department what your opening requires before you buy, because putting in a door that isn’t rated for the zone is money thrown away.
- Heat and humidity on the hardware. South Florida’s summer heat and year-round humidity are hard on springs, cables, and the metal of the door itself. Springs cycle through expansion and contraction, cables corrode faster than they do up north, and rollers dry out and get noisy. That’s part of why spring and cable work comes up more often here than in cooler markets.
- Salt in the air near the coast. Even a few miles inland, the marine air works on steel hardware. Hinges, rollers, and track bolts pit and seize faster. If your door is within a few miles of the Intracoastal, expect to replace rollers and lubricate hinges more often than a homeowner in a drier, inland climate.
- Door size and style. A single-car door costs less than a double. A basic raised-panel steel door costs less than a carriage-house style with windows, decorative hardware, or a wood-look finish. The bigger and more detailed the door, the higher the installation number climbs within the $700 – $2,200 range.
- Age and condition of the existing system. A door that’s been neglected for years, with a bent track and stretched springs, takes more labor than one that’s been serviced. If the opener is a 20-year-old unit with no safety reverse, we’ll flag it: the repair may cost more than a replacement opener in the long run.
- Opener type and smart-home compatibility. A basic chain-drive opener is simpler and cheaper to work on than a belt-drive or a smart opener tied into a LiftMaster or Chamberlain/myQ system. If your opener connects to your phone or your home hub, the technician needs to know that ecosystem to diagnose it correctly, and that’s a skill we bring to the job.
How to Save on Garage Door
There’s no magic discount that makes a spring cost half as much, but there are real ways to keep the bill down and avoid paying twice.
- Get the free estimate first. A written estimate costs you nothing and tells you exactly what the job involves. Call (855) 658-4102 and we’ll come out, look at the door, and give you a number before anything is touched.
- Fix the small stuff before it grows. A noisy roller or a slightly misaligned track is a $110 – $220 job. Left alone, a bad roller wears the track, a bad track strains the springs, and a strained spring snaps. Catching it early is the cheapest repair you’ll ever make.
- Lubricate the moving parts. A few minutes with a garage-door lubricant on the hinges, rollers, and track a couple of times a year cuts wear and keeps things quiet. Don’t lubricate the springs themselves; just the moving metal.
- Replace a matched pair of springs together. If one spring breaks, the other is almost certainly the same age and under the same load. Replacing one now and the other in six months means paying for the job twice. A pair is the better value even though the number is higher upfront.
- Don’t replace a door that only needs a panel. A dented or rusted panel is a $250 – $500 fix, not a $2,200 door. We’ll tell you honestly when a repair is the right call and when a door is genuinely at the end of its life.
One caution: springs and cables are under extreme tension. Never try to adjust, remove, or replace them yourself. That’s the one part of a garage door system where a mistake can put you in the hospital. Spring repair done safely, the first time, is what we’re here for. For related reading on what we cover, see our garage door spring repair page.
Can You Repair My Door the Same Day in Franklin Park?
Yes, in most cases. Same-day service is available, and a broken spring or a door that won’t close is the kind of call we prioritize. We answer the phone 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. If you call outside those hours, we book you into the next opening.
When the door won’t move, we do. Whether it’s a snapped spring, a dead opener, or a door that’s come off its track, the first step is a diagnosis, and the second is a written estimate. Most standard repairs can be handled in a single visit. If a part has to be ordered (a specific panel, a particular opener model), we’ll tell you the timeline upfront so you’re not waiting in the dark. To get on the schedule, call (855) 658-4102.
Repair or Replace: Which Makes More Sense?
Repair usually wins when the door’s structure is sound and the problem is mechanical: a spring, a cable, a roller, a track, or the opener. A door that’s 15 years old but straight and solid can keep going for years with normal repairs, and a $150 – $600 repair is a lot less than a $700 – $2,200 replacement.
Replacement starts to make sense when the panels are rusted through or bent beyond straightening, when the door doesn’t meet current wind-rating requirements for your zone, or when you’re pouring money into the same door year after year. If you’re weighing it, we’ll walk you through the trade-offs honestly. We don’t push replacements. Built for your door, not ours.
What Brands Do You Work On?
We work on the brand you already have. Our technicians are experienced with eight of the most widely installed names in the industry: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means whether your opener is a LiftMaster with myQ or a plain Chamberlain unit, whether your door is a Clopay steel raised-panel or an Amarr carriage-house, you don’t have to hunt for a specialist who knows that line. It also means the same company that installs a new Clopay door today can repair the Chamberlain opener or replace the springs two years from now, with no juggling multiple vendors. From opener to panel, one call covers it all.
If your brand isn’t on that list, call (855) 658-4102 and ask before you book. We’d rather tell you upfront than have you wait for a technician who isn’t familiar with the equipment.
What Does a Garage Door Inspection Cover?
A proper look at the door covers the whole system, not just the part that’s acting up. That’s how you avoid paying for a repair that doesn’t actually fix the problem.
- Springs: tension, wear, and whether a matched pair is due together.
- Cables: fraying, corrosion, and the drum and anchor points.
- Track: alignment, bends, and the mounting brackets.
- Rollers and hinges: wear, noise, and lubrication.
- Opener and safety reverse: force settings, travel limits, and whether the auto-reverse works.
- Panels and seals: dents, rust, and the weather seal along the bottom.
If your door is in Franklin Park and it’s been a while since anyone looked at it, an inspection is a cheap way to head off the expensive surprise. Our technicians have up to 8 years of experience, and we diagnose before we quote.
FAQs – Garage Door Cost
How much does garage door repair cost in Franklin Park?
Most garage door repairs in Franklin Park run $150 to $600. Spring repair is typically $180 to $340 for one spring, cable repair is $130 to $250, and opener repair is $120 to $320. The written estimate sets the final price. Call (855) 658-4102 for an exact quote, and estimates are free.
How much does a new garage door cost in Franklin Park?
New garage door installation in Franklin Park typically runs $700 to $2,200. The number depends on the door size, the material, and whether the opening meets the county’s hurricane-zone rating requirements. Call (855) 658-4102 for a free on-site estimate.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door’s structure is sound. A $150 to $600 repair beats a $700 to $2,200 replacement unless the panels are rusted through, the door doesn’t meet the current wind rating for the zone, or you’re repairing the same door repeatedly. Call (855) 658-4102 and we’ll tell you which one your door needs, not which one costs more.
How much does a broken spring cost to fix?
Spring repair in Franklin Park is typically $180 to $340 for one spring, and a matched pair is usually replaced together for about twice that. Springs are under extreme tension, so this isn’t a DIY job. Call (855) 658-4102 for a free estimate.
Can you come today if my door won’t close?
Often, yes. A door that won’t close is a same-day priority. We answer the phone 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. Call (855) 658-4102 and we’ll book you into the next opening.
Why Get a Written Estimate Before You Book?
A written estimate tells you exactly what the job involves, which parts are being replaced, and what the final number is. It prevents the surprise on the invoice that turns a $200 roller job into a $600 bill you didn’t agree to. The estimate is free, and it’s the price. No service-call fee, no diagnostic fee, no trip charge. We look at the door, we tell you what it needs, and you decide.
Franklin Park homeowners rely on their garage door every day. It’s the way you come into the house, the way the kids get their bikes out, and the way the car stays out of the rain. When it stops working, you want someone who knows the brand, can diagnose it correctly, and won’t push a replacement you don’t need. That’s the job we do, from Pompano Beach down through Broward County.
Contact Us for a Free Garage Door Estimate in Franklin Park
Call (855) 658-4102 for a free estimate on garage door repair, spring repair, opener repair, or a new door installation in Franklin Park. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Tell us what the door is doing, and we’ll tell you what it needs and what it costs.
Pricing reflects the Franklin Park market as of 2026. Pompano Beach Garage Door Repair Co offers free estimates – call (855) 658-4102.
Written by the team at Pompano Beach Garage Door Repair Co.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Kelly Doyle"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Keisha Ellison"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Vivian Wong